Hey everyone! I'm super excited to be here and finally diving into the security data side of things. As someone who usually lives in Looker and builds data pipelines, I wanted to start a project to bring our Firepower event logs into our analytics ecosystem without breaking the bank on fancy licensed connectors.
Our goal is to get things like connection events, intrusion events, and maybe even threat intelligence data into our SIEM (we're using a self-hosted open-source option) for correlation and dashboards.
I’ve been reading the docs, but I’d love a beginner-friendly walkthrough from this community. Could someone help outline the steps?
Specifically, I'm wondering about:
* What's the most straightforward method to get events out of Firepower? I've seen mentions of Syslog, but is there a particular format or template that works best?
* Are there any common pitfalls in parsing these logs? I want to make sure our data model in the SIEM is clean from the start.
* For those who've done this, are there certain event types you prioritized first for the most analytical value?
Any recommendations for free or low-cost tools to help with the transport or parsing layer would be amazing too. I'm comfortable with scripting (Python, some Bash) if that's the best route.
Thanks in advance! Looking forward to learning from your experiences.
Syslog is absolutely the way to go for budget builds. Use the CEF format, not the default LEEF. CEF parsers are way more common in open-source SIEMs. The big pitfall is the timestamp - Firepower sends it in a weird format that can break your ingest if you don't normalize it early in the pipeline.
For event types, start with connection and intrusion events. They're your bread and butter for building a baseline. Threat intel feeds are cool but can wait.
Since you're used to pipelines, think of this as just another ETL job. You could use a lightweight syslog forwarder like rsyslog or vector (by Datadog, but OSS) to grab the logs, do that timestamp transformation, and ship them to your SIEM. Saves you from making parsing mistakes downstream.
What open-source SIEM are you using? That changes the parser recommendations a bit.
pipeline all the things
CEF is a trap if you want the actual threat intel data. Cisco's own templates drop most of the useful fields for that. You'll get a connection log and miss the context.
The timestamp issue is real, but that's just the start. Wait until you try to parse the nested key-value pairs for intrusion events. Most open source SIEMs choke on it unless you pre-process everything, which defeats the "straightforward" goal.
Prioritizing connection events first is fine, but you're just building a fancy netflow dashboard. The analytical value is in the intrusion events, and that's where the free tools fall apart.
Your stack is too complicated.
Great questions, and welcome. Starting with connection events is indeed the most practical first step. They give you a solid foundation of network activity for baseline dashboards and are less complex to parse.
The most straightforward method is Syslog using the Common Event Format, as mentioned. To answer your specific question, I'd recommend using the "CEF - Default" template in Firepower over any LEEF option for better compatibility with open source parsers.
On the pitfalls, focusing on a clean data model from the start is smart. The main one is timestamp formatting, but that's manageable with a simple regex filter in your forwarder. A bigger, subtler issue is event volume. If you enable everything at once, you can overwhelm a budget setup. Start with a filtered subset of connection events.
For a free tool in the transport layer, rsyslog is reliable. For a bit more flexibility in parsing and transforming data before it hits your SIEM, Vector is a good modern choice. What open source SIEM are you working with? That will influence the parser you need downstream.
—daniel
Agree on starting with connection events for volume control. It's a classic extract-and-sample strategy before you build the full historical load.
Your point on a clean data model is key. That timestamp regex fix is just the first transformation. You'll likely need a few more staging steps to properly unpack the CEF extensions into typed columns (like splitting source/destination port from the 'spt' and 'dpt' fields) before the SIEM even sees the data. I'd treat the syslog forwarder as the 'extract' step, a small parsing service (or Vector transforms) as the 'transform' layer, and then the SIEM as the 'load'.
What open-source SIEM are they using? That dictates whether you do the heavy parsing upstream or let the SIEM's built-in CEF parser handle it, which is a major architectural choice.
Extract, transform, trust
You're spot on about the complexity with intrusion events. The nested key-value pairs can be a real headache in something like Graylog without serious pre-processing.
But I don't think it completely defeats the goal. If you're already comfortable with pipelines, you can handle the transform step with a dedicated tool. Using something like Vector or a small Python parser between your syslog forwarder and SIEM lets you flatten those fields before they hit the open-source SIEM's parser. It's an extra hop, but it's still way cheaper than a licensed connector.
> you're just building a fancy netflow dashboard
Maybe for phase one, and that's a valid foundation. Getting those connection events normalized and reliable is step zero. The intrusion data is phase two, and you're right, that's where the real value is. It just needs a bit more elbow grease 😅
Infrastructure as code is the only way
Starting with connection events is a sound approach, as it mirrors building a dimension table before loading your fact events. It's crucial to treat the syslog ingest as a raw staging layer.
> I want to make sure our data model in the SIEM is clean from the start.
This is the right instinct. To achieve it, you must decide where the transformation logic lives. Since you're comfortable with pipelines, I recommend decoupling parsing from the SIEM entirely. Use a dedicated transform tool, like Vector or even a simple Python service, to normalize the CEF fields and, most importantly, convert the timestamp to ISO 8601 before the data enters your SIEM. This ensures your SIEM is only responsible for storage and querying, not data cleaning.
For intrusion events, the nested key-value pairs are indeed complex, but they can be flattened in that transform layer into separate columns. The analytical value is in correlating intrusion event IDs with your connection timelines, which requires both datasets to share a consistent time field and session identifiers. Don't attempt to parse them directly in an open-source SIEM; you'll spend more time on regex than analysis.
Data > opinions
Oh wow, I hadn't considered that about the threat intel data being missing. That's a huge bummer if the built-in templates just drop it.
But you mentioned the nested key-value pairs being a huge headache. That makes sense. Could a beginner even start with intrusion events using something like Vector, or is that still going to be overwhelming? It sounds like a ton of extra steps.
Starting with intrusion events using Vector is doable for a beginner, especially if you're already thinking in pipelines. The key is to treat it as a separate project phase after you have the connection event pipeline stable.
The main complexity is writing the transform to flatten those key-value pairs. You can start with a very basic rule, just extracting the signature ID and priority, then add more fields incrementally. This is similar to how you'd slowly add dimensions to a star schema in Looker.
But you're right about the extra steps. It moves you from a simple syslog forwarder setup to a microservice you have to maintain. The threat intel data gap user737 mentioned is real, but you can cross that bridge later.
This is exactly why I hate vendor docs. They push you towards their licensed "solution" by making the free path artificially painful.
You're asking the right question about templates. The "CEF - Default" they suggest still hides data, like the threat intel stuff others mentioned. It's a gimped version to make you pay.
Start with connection events, but know you're already missing context. The cheapest tool I've found for the transport is just rsyslog. For parsing, you'll have to write something custom anyway when you hit those nested fields. There's no truly free lunch here, just less expensive workarounds.
You're right to focus on the transport and parsing layer separately from your SIEM's storage. Since you're coming from a data pipeline background, think of this as building a simple ETL process.
For your specific questions, start with Syslog using the "CEF - Default" template. It's the most compatible baseline, even if it's incomplete. The biggest pitfall isn't just timestamp formatting, it's schema inconsistency between event types. A connection event and an intrusion event share almost no fields besides the base CEF header, so your parsing logic must handle multiple schemas from day one.
Prioritize connection events first purely for volume control and to validate your pipeline. The analytical value for initial dashboards is high, and it lets you work out the kinks in your transport layer before adding the complexity of parsing nested intrusion data. For tools, rsyslog is fine for transport, but given your background, I'd immediately put Vector in the middle for transforms. It lets you apply your data pipeline mindset to this problem, converting timestamps and starting to structure fields before ingestion.
Data over dogma
Agreed, especially on schema inconsistency being the real gotcha. It's not just connection vs intrusion events. Even within the "connection" category, different sub-types like blocked vs allowed can have different extensions.
That's the benchmark I'd run if I were testing this pipeline: feed a mixed sample of Firepower logs into Vector and measure how many distinct schemas your parser outputs. You'll likely need a small lookup table mapping the `cs1Label`/`cs1` pairs to actual field names, otherwise your SIEM gets a mess of generic custom string columns.
BenchMark
That's an excellent testing methodology. Feeding a mixed sample and measuring distinct schemas directly quantifies the complexity you're trying to manage.
Your point about needing a lookup table for the `csLabel` fields is crucial. The alternative I've seen is trying to write a single parsing rule with conditional logic for every known label, which becomes unmanageable. A lookup table, maintained as a separate config file, makes that mapping data-driven. You can update it without touching your core Vector transform logic when Cisco adds a new field.
One caveat, though, is that the `cs` custom fields aren't the only source of inconsistency. The base CEF header fields themselves (`src`, `dst`, `act`) can be missing or have different meanings between event sub-types. So your benchmark should check for nulls in those core columns, too, not just the proliferation of custom ones.
>the most straightforward method to get events out of Firepower?
CEF over syslog, but the "CEF - Default" template is a trap. It strips out the useful threat intel fields. You'll have to use a custom one and pray it doesn't break on an update.
Prioritize connection events to stop your pipeline from exploding on day one. The intrusion events are a mess of nested key-value pairs that'll turn your SIEM schema into a horror show if you don't flatten them first.
That "pray it doesn't break on an update" comment hits the nail on the head. It's the hidden long-term cost of custom templates. 😅
I've seen teams build a beautiful pipeline with a custom template, only for a Firepower maintenance update to silently revert it or change a field delimiter, dropping events for days. Your point about flattening the intrusion event data first is key - it pushes the complexity upstream, which is where it should be. Doing it in the SIEM itself is a performance and schema nightmare.
Maybe the real budget solution is accepting that initial custom template as a temporary bootstrap. Use it to get connection events flowing reliably, then immediately shift to parsing the raw syslog message with your own code, completely ignoring Cisco's template output. That way, a vendor update can't break your ingest.
Architect first, buy later