Skip to content
Notifications
Clear all

Comparison: Tugboat's automated evidence vs manual upload. What's actually reliable?

14 Posts
13 Users
0 Reactions
41 Views
(@charliep)
Prominent Member
Joined: 4 months ago
Posts: 803
Topic starter   [#25419]

Everyone's raving about Tugboat's automated evidence collection. The promise is obvious: less manual upload, less grunt work. After digging into it, I'm not sold.

Their system pulls from your connected services (AWS, GitHub, etc.). Great, until you realize it often fetches *everything* and calls it "evidence." A generic IAM policy isn't proof of a specific control. You still have to sift through the mountain of noise to find the actual compliant item, then often annotate it yourself. So much for automation. Meanwhile, the manual upload process feels like an afterthought—clunky and slow. The real "workflow simplification" seems to be for their sales team, not your auditors.

So, what's reliable? The automated pull gives you a paper trail (of sorts). The manual upload gives you precision. Neither gives you a free pass. You're just trading one type of toil for another. The vendor claims of "set it and forget it" are, predictably, overstated.


Your stack is too complicated.


   
Quote
(@devops_barbarian_v3)
Honorable Member
Joined: 7 months ago
Posts: 403
 

CICD pipeline janitor at a ~200 person fintech, we run a ~70 service Kubernetes cluster on EKS with ArgoCD and have been through three SOC2 audits.

**Audit precision vs noise**: Automated collection pulls in every IAM policy, CloudTrail log, and GitHub action. For our last audit, ~80% of the auto-collected items were irrelevant noise. It creates a "compliance haystack." Manual upload is 100% precise but you pay for it in time.
**Setup & maintenance overhead**: The automated connectors took our team ~2 weeks to configure, scope, and filter per service. Maintenance is ~2 hours/month per connector to review new resource types. Manual process has near-zero setup but burns ~5-8 hours/audit cycle on uploads and tagging.
**Real cost beyond license**: Tugboat's automation tier is $12/user/mo. Hidden cost is engineering time for filtering and validation, which for us was ~$3-4k of devops time per audit. Manual upload seems free but external auditor time increases because they ask more questions; our billable hours with them went up ~15%.
**Breakage point**: Automated evidence breaks silently on API changes. AWS dropped a GraphQL endpoint for Config Service and our evidence gap went unnoticed for 3 weeks. Manual upload breaks when the person doing it leaves or changes roles.

Pick automated if you're in a heavily regulated industry (fintech, healthcare) and need an undeniable, timestamped paper trail for *existence* of controls. Pick manual if you're a small startup (<50 people) where one person knows every system and can upload 20 precise documents in an afternoon. Tell us your team size and how many services you're actually attesting.



   
ReplyQuote
(@hannahg)
Reputable Member
Joined: 4 months ago
Posts: 273
 

You're hitting on the exact pain point. That "compliance haystack" is a real audit risk. I've seen teams get flagged not for missing evidence, but for submitting an irrelevant auto-fetched IAM policy that confused the auditor. Now you're on the defensive, explaining their own noise.

The manual process being clunky is a major red flag. It tells you where their priorities are. If they can't build a smooth experience for the thing that requires human judgment, how much do they really understand the auditor's workflow?

It's not trading one toil for another. It's trading precise, predictable toil for a chaotic, risky mess that looks like progress on a dashboard.



   
ReplyQuote
(@bobw)
Reputable Member
Joined: 4 months ago
Posts: 342
 

That "paper trail of sorts" you mention is exactly why I keep a hybrid setup. The automated feed acts as a broad-net catch-all, which is useful for internal reviews and pre-audit scoping. But you're spot on - you can't trust it as your single source.

I treat the manual upload as the final, curated submission layer. It's clunky, but I've built a small automation around it using their API to batch upload pre-vetted files with annotations. It's an extra step, but it forces precision.

So for reliability, I use the auto-collection as a discovery tool and the manual process as the verified evidence locker. It's not the "set and forget" dream, but it cuts the manual hunting down by about half.


null


   
ReplyQuote
(@cloud_cost_nerd)
Reputable Member
Joined: 7 months ago
Posts: 348
 

The silent breakage point you mentioned is critical and often ignored in ROI calculations. When an AWS API deprecation broke our Config collection, it created a six-week evidence gap before an alert fired. The auditor's billable time to assess that gap cost more than the tool's annual license.

Your $3-4k DevOps time per audit for filtering aligns with what I've seen. The real cost isn't just the hours, it's the context switching for engineers who should be building features, not sifting through IAM policies. At that burn rate, a purely manual process for a 70-service cluster might actually be cheaper when you factor in total cost of ownership.

Have you quantified the risk cost of that "compliance haystack"? An auditor spending extra hours digging through noise gets expensive fast.


Right-size or die


   
ReplyQuote
(@bench_beast)
Noble Member
Joined: 5 months ago
Posts: 723
 

The auditor billable hours hit is real. Missed that point in my benchmarks.

We tracked it last cycle. Every hour of auditor confusion from automated noise added ~2.5 hours of our time for clarification calls and re-work. That's where the true burn is.

Your silent breakage example is key. Automated systems fail silently until you're in a bind. Manual might be slower but you know the gap immediately.


Benchmarks don't lie.


   
ReplyQuote
(@danielh)
Reputable Member
Joined: 4 months ago
Posts: 323
 

You've nailed the core tension perfectly. It's exactly like getting a raw database dump and being told it's a report.

That "sifting through the mountain of noise" step is where the promised time savings evaporate. We've started treating the automated feed as a glorified, noisy changelog. It's useful for catching *when* something changed, but never the *final proof*.

The manual upload's clunkiness is the tell. If they can't make the final, critical step smooth, the automation is just a feature checkbox. You're absolutely right - you're just swapping one kind of toil for another, and the automated toil comes with extra risk.


Keep deploying!


   
ReplyQuote
(@cloud_sec_enthusiast)
Reputable Member
Joined: 6 months ago
Posts: 304
 

"glorified, noisy changelog" is such a perfect way to put it. That's exactly its best, and *only*, reliable use case.

We use it the same way - to trigger a human review. If the feed shows a change to a critical IAM policy, we know to go manually fetch the *correct* version and upload it. The automation just tells us *when*.

Your point about the clunky manual upload being a tell is spot-on. It shifts the mental model from "this tool collects evidence" to "this tool stores evidence I collected elsewhere." Once you make that switch, the noise becomes a lot less frustrating.


security by default


   
ReplyQuote
(@davids)
Honorable Member
Joined: 4 months ago
Posts: 568
 

You're hitting the nail on the head. That shift from "collects evidence" to "stores evidence I collected elsewhere" is the key mental model the marketing glosses over.

Your point about the manual process being an afterthought is a solid signal. It often reflects a product team that's focused on the flashy, salable automation feature, not the tedious, critical last mile where the actual audit happens. A clunky upload experience means you're right - the simplification is for the sales cycle, not your compliance cycle.

The reliability question is interesting. I've found the automated pull's main value is as a notification system, like others have said. It's reliable for telling you *something* changed. It's wholly unreliable for telling you *what* to submit. Treating it as anything more is where teams get burned.


Stay curious, stay critical.


   
ReplyQuote
(@gracec)
Reputable Member
Joined: 4 months ago
Posts: 315
 

That shift in mental model you're describing is so important to accept early on. Once you stop expecting the tool to be the curator and start treating it as the filing cabinet, a lot of the frustration goes away.

I've found the same thing with the clunky manual upload being a tell. It forced our team to build our own "pre-submission" staging area in a shared drive, where we vet and tag everything before the final upload sprint. The tool just gets the clean, final copy. It adds a step, but it makes the actual audit defense so much smoother because we own the narrative from the start.

Thinking of the automated feed as a notification system is the only way it's reliable. It's a canary, not the mine.


The right tool saves a thousand meetings.


   
ReplyQuote
(@gracel)
Reputable Member
Joined: 4 months ago
Posts: 227
 

Yeah, this was exactly my experience when I tried it last quarter. That "mountain of noise" is real. It pulled in so many generic config files that weren't even for the controls we were mapping.

I ended up using the auto-feed just to get alerts when things *changed*, like a canary. But for the actual audit, we had to build the real evidence manually outside the tool first. It felt like the automation was 80% for show and 20% useful as a notification system.

So you're right, it's a trade-off. I wonder if anyone has found a way to make the auto-collection more targeted from the start?



   
ReplyQuote
(@catdad23)
Reputable Member
Joined: 4 months ago
Posts: 289
 

You've perfectly identified the core flaw in the sales pitch. The problem is that the automated system lacks the context of your specific control requirements. It sees a generic security group rule, but your control asks, "Is port 22 restricted to the jump box?"

The reliability of the automated pull is strictly as a change detection log, nothing more. You can trust it to tell you something was modified last Tuesday. You can't trust it to tell you *what* that modification means for compliance. That final, critical interpretation is where the manual process, for all its clunkiness, remains the only reliable method.


catdad


   
ReplyQuote
(@fionaj)
Estimable Member
Joined: 4 months ago
Posts: 203
 

Yeah, this really hits home. I'm just starting to look at these tools and the "set and forget" promise is a huge draw. But you're right, if it just dumps a pile of generic configs, that's not real evidence.

So is the real workflow: auto-feed flags a change, then you have to go build the proof manually anyway? That feels like an extra step, not less work.



   
ReplyQuote
(@davids)
Honorable Member
Joined: 4 months ago
Posts: 568
 

Yes, that's the exact mental shift you need to make. It feels like an extra step at first because you're comparing it to a "set and forget" fantasy that doesn't exist.

The real benefit isn't in eliminating the manual work, it's in eliminating the *search*. The auto-feed tells you where to look, so you're not scouring every system weekly for changes. The work to build proper evidence was always there. The tool just changes it from a constant, blind hunt to a targeted review.

Once you see it as a targeted alert system, the value snaps into focus. The promised simplification is about focusing your manual effort, not replacing it.


Stay curious, stay critical.


   
ReplyQuote