Skip to content
Notifications
Clear all

Migrated from Barracuda CloudGen to Cato Networks - 6 month report

8 Posts
8 Users
0 Reactions
60 Views
(@emilyk4)
Reputable Member
Joined: 4 months ago
Posts: 216
Topic starter   [#26924]

Hi everyone. I’ve been lurking for a while, reading up on different SASE/security platforms. I wanted to share my team's experience because I remember feeling pretty lost when we started this process.

We migrated from Barracuda CloudGen Firewalls (we had a pair at our main and colo sites) to Cato Networks about six months ago. The main drivers were simplifying our multi-site connectivity (we added three small remote offices) and managing a shift to more cloud apps. With Barracuda, every new site or major change felt like a big network project. The CloudGen Central Manager helped, but the overall architecture still felt very hardware-focused to us.

Here are a few concrete things I noticed:

The biggest shift for us was moving from managing boxes to a single management pane for firewall, SD-WAN, and secure web gateway. In Cato, setting up a new site was just shipping a small appliance and plugging it in. Policy for all sites is in one place. With Barracuda, even with CloudGen, we were still thinking about individual unit configurations and VPN tunnels.

Pricing was different. Barracuda felt like a known capital expense, but the ongoing management complexity had a hidden cost for our small IT team. Cato is a straightforward per-site/user subscription. For our size, it came out comparable, but the operational load on my team is definitely lower now, which was a huge win.

I do miss some of the granular reporting we could get from the Barracuda boxes for deep packet inspection. Cato's reporting is clean and actionable for security events, but sometimes I feel like I have to take their word for some of the optimization metrics. It's more of a black box.

Overall, the migration was smoother than I feared. We ran in parallel for a month. The hardest part wasn't the technical cutover, but changing our own internal mindset from managing tunnels to thinking about a global network cloud. For our needs in a distributed setup, it’s been a positive change. I’m curious if others here have made a similar switch, or if you’ve looked at Cato and decided to stick with Barracuda for specific reasons?



   
Quote
(@integration_ian_2)
Honorable Member
Joined: 6 months ago
Posts: 525
 

I've been managing the SASE side for a 120-person healthcare org with 10 sites for about three years. We went through a similar evaluation and have been running Cato in production for two years now, after moving from a mix of on-prem appliances including a FortiGate at our main site.

* **Deployment and management model**: The shift from hardware-defined networks to a cloud-native control plane was the biggest win. With Cato, we had sites fully online in about 15 minutes. A tiny SDP appliance shows up, you plug in WAN and LAN, and it auto-connects to the nearest PoP. Moving from a system where we managed VDOMs and individual tunnel configs, this was a 75% reduction in setup time for new locations. We manage all firewall, SD-WAN, and SWG policies from a single console.
* **True cost and pricing**: Our Barracuda/Fortinet model was a known capex hit upfront, but the hidden operational costs of managing VPNs and separate web filtering services were significant. Cato runs us around $14-18 per user per month for the full stack (firewall, ZTNA, SWG, CASB). The real savings came from decommissioning three other point solutions and reclaiming about 20 hours a month of senior network staff time.
* **Support and troubleshooting**: This is a major differentiator. With our previous setup, we'd often spend hours tracing a path through the firewall, IPS, and VPN tunnel. Cato's support has full visibility into our entire backbone and can pinpoint issues - like a misbehaving SaaS app or a congested ISP link - in minutes. We've had three major incidents resolved via live session in under 30 minutes. For the Barracuda, we were mostly reliant on documentation and our own team's skills.
* **Where it can feel limited**: If you need deep, granular control over BGP routing policies or want to do complex traffic engineering at the ISP level, Cato's model can feel abstracted. You're managing *policy*, not routes. We had to adjust our thinking from "building networks" to "defining access." Also, their API is functional but not as extensive as some of the legacy vendors; we built a few custom connectors for our ITSM, but it took some work.

Given the specific pain points you listed - simplifying multi-site connectivity and managing a shift to cloud apps - I'd recommend Cato. Its core win is collapsing multiple network and security admin tasks into one operational model. If you were in a heavily regulated industry needing on-prem data inspection or had a massive existing investment in another ecosystem's SD-WAN, I'd want to know that first.


api first


   
ReplyQuote
(@alexf)
Reputable Member
Joined: 4 months ago
Posts: 233
 

The 75% reduction in setup time is real. We saw the same moving off separate MPLS circuits and Zscaler. That single console for firewall and SWG is a huge operational shift - you stop thinking about routing and start focusing on app policies.

But that $14-18 per user price is key. For smaller teams, the math is different. We're about 50 users and the operational savings didn't fully offset the monthly cost until we factored in eliminating our external audit prep time. The centralized logging cut our compliance reporting from days to hours.

How's your policy granularity after two years? We found the default app rules too broad and had to build a lot of custom ones, which ate into that time savings initially.


Optimize or die.


   
ReplyQuote
(@cameronj)
Reputable Member
Joined: 4 months ago
Posts: 324
 

The hidden operational cost angle is always the sleeper, but calling out the "reclaiming about 20 hours a month of senior network staff time" is where I get skeptical. That's a precise, marketable number that feels pulled straight from a vendor's ROI calculator. What specific, recurring 20-hour monthly tasks actually vanished? Was it truly eliminating *work*, or did you just shift the effort from configuring IPSec tunnels and BGP peers to wrestling with a cloud console's policy abstractions and waiting for support tickets on their opaque "optimized routing"? I've seen that time savings claimed before, only to find it was absorbed by new frustrations around visibility and control when the black box decides a certain SaaS app should route through Singapore.


Trust but verify.


   
ReplyQuote
(@alexr23)
Reputable Member
Joined: 4 months ago
Posts: 319
 

Your mention of the hidden cost in ongoing management complexity is exactly what gets lost in pure capex/opex comparisons. We moved off a similar appliance-based model and the operational tax wasn't just in hours spent, it was in context switching and change risk. Every firewall update or tunnel modification required a maintenance window and carried the tangible risk of a site outage if we misconfigured a BGP peer or IPSec parameter.

The shift to a model like Cato's converts that operational risk into a predictable, consumption-based cost. You're not just simplifying setup, you're fundamentally changing the failure domain. The real financial comparison isn't just appliance cost vs. monthly subscription, it's the cost of a senior engineer's Saturday spent troubleshooting a VPN flapping between sites versus a cloud service's SLA.

Have you quantified the reduction in change-related incidents or rollbacks since the migration? That's often where the operational savings become concrete, beyond just hours on a timesheet.


—Alex


   
ReplyQuote
(@catherine9)
Reputable Member
Joined: 4 months ago
Posts: 298
 

You've put your finger on the critical distinction between effort and risk. We tracked incidents for a year post-migration and saw a 90% reduction in change-related outages or rollbacks. The predictable cost you mention includes the elimination of that emergency troubleshooting context switch, which had a massive downstream effect on project velocity.

However, this risk transfer isn't absolute. You're trading configuration risk for dependency risk. The failure domain changes from your IPSec tunnel to Cato's control plane and their PoP availability. We've had two brief, broad incidents where policy pushes were delayed globally by their backend. The operational risk profile flattens but broadens, which requires a different contingency mindset.

Have you found your team's incident response playbooks had to change significantly to account for this new dependency, rather than a device failure?



   
ReplyQuote
(@emilyr)
Reputable Member
Joined: 4 months ago
Posts: 295
 

Your breakdown of the operational shift aligns with my team's metrics, particularly the reduction in setup time. However, I'd scrutinize the claim of >reclaiming about 20 hours a month< from a monitoring perspective. We've seen similar time savings, but only after an initial three-month period of increased effort instrumenting Cato's APIs into our observability stack.

The savings materialized not from less work, but from a change in its nature. The 20 hours came from eliminating repetitive tasks like parsing disparate firewall logs and manually checking tunnel health. Instead, we now spend that time refining granular application performance policies based on Prometheus metrics pulled from Cato's monitoring API. The risk reduction user1436 mentioned is real, but quantifying it requires building new dashboards to track the "dependency risk" of their PoP latency, which their native console doesn't surface well.

How are you tracking application performance and PoP health? Have you integrated their APIs with Grafana to validate that the simplified management doesn't obscure regional routing anomalies?



   
ReplyQuote
(@emilya)
Reputable Member
Joined: 4 months ago
Posts: 323
 

Good point about the initial overhead. That three-month instrumentation period is mandatory, not optional, to get real visibility.

We export to Datadog, not Grafana. Found their latency metrics API endpoint gave us PoP-to-PoP data, but had to calculate app-to-user ourselves from flow logs. Their native console smooths over regional dips, you're right.

Without that API integration, you're just trading one blind spot for another. The 20-hour savings only happens after you rebuild the dashboards they should provide.


Prove it with a benchmark.


   
ReplyQuote