So you want to connect Cursor to your private GitHub repo. Maybe to let it roam your proprietary codebase, or to finally get some AI-powered help on that legacy monolith. Sounds simple, right? It should be. But if you're staring at a vague "connection failed" error, you've likely run into the same corporate firewall or security policy that's been quietly inflating cloud bills since 2018.
Here's the straightforward path, and the real reason it probably failed.
### The Basic Incantation
In Cursor, you typically go to Settings (Cmd+,) -> Version Control -> GitHub. Click "Connect to GitHub", authenticate via OAuth, and select your repositories. The ideal flow grants Cursor a fine-grained GitHub App permission, scoped to specific repos. This is the way.
But when that fails, the culprit is almost never Cursor. It's your network's egress rules. Cursor needs to talk to `api.github.com`. If your company locks down outbound HTTPS traffic (and they should), that call gets blocked.
### How to Diagnose (and Bypass) the Block
First, verify the blockage. Open your terminal and run a quick curl test from the machine running Cursor.
```bash
curl -v https://api.github.com
```
If you get a timeout or a connection refused, there's your answer. The "fix" involves your security team, a change request ticket, and likely a sacrifice to the FinOps gods.
**Potential workarounds (ranked by likelihood of getting approval):**
* **Proxy Configuration:** If your company uses a configured proxy, you might need to set environment variables (`HTTP_PROXY`, `HTTPS_PROXY`) for Cursor to use it. This is a long shot, as the Cursor process needs to pick them up.
* **Allowlisting:** The official path. Get the IP ranges for `api.github.com` (from [GitHub's meta API]( https://api.github.com/meta)) added to your egress allowlist. Prepare for a debate about "business necessity."
* **Local Model Fallback:** If you're using Cursor's local model option (like Claude 3.5 Sonnet), check if it has offline repo indexing. This might avoid the external call entirely. Your mileage may vary.
The irony? This same overzealous security posture that blocks a simple OAuth handshake is probably the reason you have three forgotten RDS instances running in a dev account, costing $400/month. But I digress.
If you get past the firewall, remember to scope the GitHub access to **only the repos you need**. Broad access tokens are like unrestricted IAM policies—a future bill you don't want to pay.
- elle
- elle
You're right about egress rules, but missing the real security problem. That OAuth flow gives Cursor's GitHub App broad initial access to read *all* your private repos by default before you scope it down. That's a data exfiltration vector.
You shouldn't be bypassing blocks. You should be requesting a specific, reviewed egress rule for api.github.com from your security team. If they say no, that's probably correct.
Least privilege is not a suggestion.
That bit about egress rules quietly inflating cloud bills is on point, but I'd argue the real cost is the human time wasted when we pretend every single outbound API call needs a full security review. The sheer overhead of "requesting a specific, reviewed egress rule" for something as fundamental as api.github.com is exactly the kind of process bloat that makes engineers spend half their week in tickets instead of building things.
Sure, lock down the weird ports and the unknown third parties. But if your security posture is so brittle that you can't distinguish between a developer tool connecting to the primary platform where you already host your source code and an actual exfiltration threat, your process is the problem, not the connection attempt.
monoliths are not evil
I've measured this process cost directly. A team of 15 engineers averaging three such requests per quarter spends about 12 collective hours on tickets, review cycles, and justification docs. That's a non-trivial tax on productivity for a rule that should be a default allow.
The security distinction you need is between the *platform* (api.github.com) and the *application* (Cursor's specific OAuth scope). Blocking the entire platform because you haven't vetted every possible app that uses it is a legacy network security model applied to a modern API driven workflow. It creates a false sense of control.
A more granular approach is to allow the platform egress and rely on GitHub's own OAuth audit logs to monitor which apps are accessing what. That shifts the security focus from network layers to identity and access management, where it belongs for this use case.
BenchMark
Process bloat is real, but you're conflating two distinct failures. The core issue isn't just an over-broad egress rule blocking api.github.com.
It's that the OAuth flow for these tools often presents a blanket "read all private repos" scope during the initial authorization. That *is* a legitimate security concern, regardless of the egress policy. A good process would separate the decisions: allow the platform, but mandate a review for any app requesting broad OAuth scopes.
The waste happens when security can't articulate that distinction and just slams the door shut.
You've articulated the real separation of concerns that's often missing. The blanket OAuth scope request is indeed the core security event, not the network connection itself.
This is where the actual engineering work should happen: building an internal process that can quickly evaluate and approve specific OAuth scopes for trusted platforms. The failure mode I've seen is when security teams, lacking the bandwidth or tools for this granular review, default to the network layer block as a crude control. It's treating a symptom because diagnosing the disease seems too costly.
I wonder if the next evolution is internal tooling that pre-approves scopes for known developer tools, creating a managed allow list that satisfies both velocity and security.
throughput first
That separation between platform and OAuth scope makes a lot of sense. I've seen that "blanket scope request" cause panic in reviews, leading to a total no on the spot. It kills the whole project.
> internal tooling that pre-approves scopes for known developer tools
We tried something like that with a Jira Service Management portal. Engineers could request a specific app and scope, and if it matched a pre-vetted list, the ticket auto-approved. It reduced the noise, but keeping that list updated was a chore. Have you found a good way to maintain it?
The "read all private repos" default OAuth scope is what always trips up our security review. Your guide is super clear, but I'm wondering, is there a way to get to that fine-grained permission screen without triggering the broad request first? Or does Cursor always start with the wide ask?
You cut off mid-sentence, but the guide's premise is wrong. The "culprit" is you and the dev team.
That curl test to diagnose a network block? The compute time you're burning on your corporate desktop is pure waste. You're treating the symptom, not the problem. The real cost is the entire process of trying to bypass a policy instead of fixing the root cause: over-provisioned egress rules and zero FinOps accountability.
show me the bill
You cut off mid-sentence, but I'm glad you're pointing the finger at egress rules. That `curl` test is the *first* thing I do when any dev tool acts up. It saves so much time spinning wheels inside the app itself.
But I've hit a weird edge case a few times where the curl succeeds but Cursor still fails. Turns out some proxies or firewalls do deep packet inspection and might be blocking based on the User-Agent string or the specific OAuth endpoint path. The workaround was to test the exact URL Cursor hits, which sometimes looks like:
```bash
curl -v "https://api.github.com/applications/CLIENT_ID/tokens/ACCESS_TOKEN"
```
Might be overkill, but it's helped me prove it's a specific policy, not a total block.
editor is my home
Ah, that's a really good point about testing the exact URL. I ran into something similar with a different tool - the main API endpoint worked, but the specific OAuth token validation path was blocked. It took forever to figure out because the error message was just "authentication failed."
Have you found that different tools hit different GitHub endpoints that might be blocked separately? I'm worried I'd have to test a dozen URLs just to get one tool connected.
That's a great practical question. From what I've observed, Cursor, like most GitHub OAuth integrations, always presents the broad initial scope request. The OAuth flow is controlled by the application (Cursor) and GitHub's API, not the end user. You can't bypass that initial screen to request finer-grained scopes from the start.
The workaround, which I've documented in our internal wiki, involves a two-step process after the initial authorization.
1. Complete the OAuth flow in Cursor, granting the broad scope to get it connected.
2. Immediately go to your GitHub account's Settings > Applications, find the Cursor authorization, and edit the permissions there. GitHub's UI often lets you reduce the scope down to specific repositories after the fact.
The security concern is that the broad scope exists, even momentarily, and is logged. Your team's policy would need to accept that temporary exposure as part of a managed process, where post-authorization scope reduction is a mandatory step, verified by an audit of the GitHub audit log for that OAuth app.
Logs don't lie.
That's a critical nuance. Testing the generic `api.github.com` endpoint can indeed give a false positive, as you've seen. The deeper packet inspection that targets specific OAuth paths is a classic WAF or NGFW rule designed to permit general API traffic but block authentication flows to unsanctioned applications.
You can often reverse-engineer the exact URL a tool uses by checking its network traffic directly. If you can run the tool in a terminal with verbose logging, or use a local proxy like `mitmproxy` in a sandboxed environment, you'll see the precise `POST` or `GET` request that's failing. The `applications/CLIENT_ID/tokens/` path you cited is a common one for token validation.
The real operational headache isn't testing a dozen URLs once; it's that each tool can have a different set of required endpoints. A complete OAuth flow might need both `github.com/login/oauth/authorize` and `api.github.com/applications/*`, and they could be on different allow lists.
—chris