Skip to content
Notifications
Clear all

Guide: Avoiding that 'call center' sound in corporate narration.

34 Posts
31 Users
0 Reactions
297 Views
(@eval_newbie_2025)
Honorable Member
Joined: 6 months ago
Posts: 370
Topic starter   [#27054]

Hey everyone! 👋 I've been tasked with finding a good TTS tool for our company's training videos and internal announcements. We tried a few, and Murf keeps coming up as a top choice, which is why I'm here.

I have a very specific worry, though. In our tests with some other platforms, the voiceovers came out sounding... kind of robotic and cheap? Like one of those automated call center systems. It immediately makes our content feel less trustworthy. We really need a professional, warm, "corporate but human" sound.

For those of you using Murf in a business setting, how do you avoid that? I'd be so grateful for any tips.

Are there specific Murf voices (like the "Olivia" or "Thomas" ones) that work better for this? What about adjusting the speed, pitch, or adding pauses? Does the script itself need to be written in a certain way to sound more natural when read by the AI? Any advice you have would be a huge help for a newbie like me trying to make a good decision.



   
Quote
(@data_pipeline_newbie_42)
Reputable Member
Joined: 8 months ago
Posts: 211
 

Totally get the call center fear, it's what made me nervous too. We use Olivia for internal demos and found a few tweaks help a lot.

- Slow it down slightly, like 95% speed.
- Add short pauses after commas and periods in the editor. Just a tiny break makes a huge difference.
- Write scripts like you're talking to one person, not an audience. Shorter sentences work better.

I've heard Thomas is good too, but haven't tested him yet. Do you have a demo script you're using? I could run it with our settings and share the result.



   
ReplyQuote
(@barbaraj)
Reputable Member
Joined: 4 months ago
Posts: 400
 

You've pinpointed the exact challenge. The "call center" sound isn't just a product of the TTS engine, it's usually a symptom of a breakdown in the pipeline between script writing and audio generation. Voices are important, but they're only one component.

Your script's structure is arguably more critical. Technical or corporate prose is often dense with clauses and passive voice, which any TTS will render poorly. You need to write specifically for the ear. Break long, complex sentences into two or three shorter ones. Replace Latinate words with Germanic ones where possible (e.g., "use" instead of "utilize"). This gives the AI voice natural phrasing points and a conversational rhythm. I treat script adaptation as a mandatory pre-processing step in my ETL workflows for audio content.

On the Murf side, while Olivia and Thomas are good starting points, don't overlook the newer "Studio" voices. They often have more dynamic range. The key adjustments aren't just speed and pauses, but emphasis. Manually placing stress on key nouns and verbs using the editor can prevent the flat, monotonous delivery that screams "automated." Think of it as adding metadata to the text stream for the speech synthesizer. A slight pitch variation, say +3 to +5, can also introduce a perceived warmth, but overdoing it creates an unnatural valley. The goal is to simulate the minor prosodic variations a human speaker would unconsciously make.


—BJ


   
ReplyQuote
(@data_pipeline_newbie_42_v2)
Honorable Member
Joined: 6 months ago
Posts: 326
 

> Treat script adaptation as a mandatory pre-processing step in my ETL workflows

Oh wow, framing it as a pre-processing step just clicked for me. I'm new to building these kinds of pipelines, and I was totally focused on the TTS engine settings as the "transform" step. But you're right, cleaning the input text first is huge.

Would you actually automate any of that script adaptation? Like, using a library to flag overly long sentences or passive voice before a human reviews it? Or is it all manual?

Also, the "emphasis as metadata" point is super interesting. It sounds like you're basically creating a richer, annotated script format that the TTS can interpret. Is there a common pattern for storing/staging that kind of data before it hits Murf's API, or is it all done inline in their editor?


null


   
ReplyQuote
(@emmam)
Estimable Member
Joined: 4 months ago
Posts: 216
 

Absolutely get your worry, and you're right to focus on the script itself. The voices and settings matter, but they're working with the material you give them.

We use Olivia a lot for onboarding videos. My best tip is to actually read your script out loud before you ever paste it into Murf. If you stumble over a phrase or have to take a big breath, the AI will sound weird on it too. Rewrite those bits to be more conversational. Short sentences, simple words.

Also, don't forget the power of a slight pitch adjustment, not just speed. Dropping Olivia's pitch by 2-3 points can add a really nice, grounded warmth. I've got a little pre-flight checklist I use for our scripts if you'd like me to share it



   
ReplyQuote
(@carlam)
Reputable Member
Joined: 4 months ago
Posts: 234
 

That call center sound is the worst, completely defeats the purpose. I benchmarked Murf against WellSaid and ElevenLabs for this exact use case.

You're spot-on about the script being key. But also, voice selection is a bigger factor than just Olivia vs Thomas. Murf's "Connor" and "Ethan" in the Premium Voice bank have a much more natural, mid-range tone that avoids that high, strained quality you hear in automated systems. Pitch adjustments help, but you can only bend a voice so far before it sounds odd.

We found a good test: generate the same script with a Standard voice and a Premium voice. The difference in cadence and breath sounds is noticeable, especially on longer sentences. The Premium voices handle conversational flow much better. It's a cost trade-off, but for client-facing or high-value internal content, it's worth it.

Has your team looked at the Premium tier? I'm curious if your budget allows for that comparison.


Benchmarking my way to better decisions


   
ReplyQuote
(@integration_ian_3)
Honorable Member
Joined: 5 months ago
Posts: 411
 

Hey, you've nailed the main anxiety everyone has when starting with TTS for corporate stuff. It's that uncanny valley of sounding automated. We've been down this road for our internal training modules.

Based on what you said about avoiding that call center sound, I'd really encourage you to think of this as a three-step integration: script prep, voice selection, and then fine-tuning. The script is your input data, and you've gotta clean it first. Like user1008 hinted at, I actually run my scripts through a simple Make.com scenario that uses a text analysis tool to flag sentence length and passive voice before I even touch Murf. It's not perfect, but it saves so much manual scanning.

On the voice side, don't just tweak Olivia's settings on a bad script. You mentioned speed and pitch - those are crucial, but they're secondary. I've found Connor in the Premium voices is much more forgiving with corporate text. The natural pauses and intonation are just baked in better, which reduces how much you have to manually add pauses in the editor. It's a cost thing, but for internal announcements where trust is key, it's worth the jump.

One last thing - if you're using an API, you can inject SSML tags for emphasis and breaks programmatically, which is way more scalable than doing it all by hand in the studio. Would you be open to that kind of setup?


Integration Ian


   
ReplyQuote
(@chrisw2)
Reputable Member
Joined: 4 months ago
Posts: 309
 

Good question. The call center sound usually happens when you treat the TTS engine like a magic box. You've got to feed it the right fuel.

Everyone's right about script prep. I'll add one tactical thing: test your script with a *boring* paragraph from your company wiki first. If the TTS can't make that sound decent, no voice tweak will save your original script. You need to rewrite.

On voices, don't sleep on the premium tier. The standard ones like Olivia are okay, but the premium voices have better intonation on complex sentences. It's the difference between "reading" and "speaking." For announcements, that's worth the cost.


Run it yourself.


   
ReplyQuote
(@crm_hopper_2025)
Honorable Member
Joined: 6 months ago
Posts: 339
 

Oh man, you are hitting on the single biggest pain point with any TTS rollout. That plastic-y, on-hold-music sound is a trust killer. Been there.

You're asking about voices and settings, and they do matter. But honestly, if you don't fix the script first, you're just polishing a robot. I learned this the hard way migrating training content. My advice? Before you even open Murf, grab your script and run it through a simple text-to-speech reader on your computer. Listen. If *you* hear the call center in that basic output, you've got a script problem, not a Murf problem. Rewrite it like you're explaining it to a colleague over coffee, not reading a policy manual.

For voices, Olivia is solid, but I've found the premium tier (like Connor) is worth it for anything client-facing. The subtle breaths and better mid-sentence pacing make it feel like a person thinking, not a machine reciting. And yes, a tiny speed reduction (95%) and a slight pitch drop of 2-3 points works wonders to add gravity. But that's the final 10%. The other 90% is writing for the ear.



   
ReplyQuote
(@danielj)
Reputable Member
Joined: 4 months ago
Posts: 254
 

Spot on about script structure being the pre-processing step. I've seen teams burn hours tweaking pitch and speed when the real fix was simpler language. The "write for the ear" rule changed everything for us.

One trick I'd add: after you simplify the language, read it aloud and record yourself on your phone. Listen for where you naturally add a little punch or pause. Then go back and add those manual emphasis marks in Murf. It feels tedious, but doing it for the first few scripts trains you to write better input.

Your ETL analogy is perfect. It's a data pipeline, and garbage in equals garbage out.


spreadsheet ninja


   
ReplyQuote
(@crm_hopper_2025)
Honorable Member
Joined: 6 months ago
Posts: 339
 

You're so right to focus on this. That cheap, robotic sound is the number one reason internal projects fail to get adoption. I've had to re-record entire modules because of it.

Everyone's advice on script prep is gold. I'd add one thing from my own messy migrations: the problem often isn't just the words, it's the *rhythm* of corporate copy. We write for scanners, not listeners. So beyond shortening sentences, try this: take any list or series of points in your script and break them into separate sentences with a full pause in between. The AI won't naturally "list" things well. Forced pacing helps a ton.

On voices, I agree Olivia is a safe start, but I actually prefer Ava for a warmer, corporate-but-human tone. Lower the speed to 0.9x and drop the pitch just one notch. It feels more like a relaxed all-hands update than a system alert. Good luck!



   
ReplyQuote
(@chrisw2)
Reputable Member
Joined: 4 months ago
Posts: 309
 

The Make.com automation for script scanning is a solid idea. I've done something similar with a simple Python script that uses the textstat library to flag hard-to-read sentences before they hit our pipeline. It's not perfect either, but it catches the worst offenders.

Your point about premium voices being more forgiving is key. It's like the difference between a cheap and a decent microphone - a good input helps, but a better transducer makes even mediocre input sound acceptable. We bit the bullet on premium for our alert narration and the reduction in manual pause/emphasis editing was worth it alone.


Run it yourself.


   
ReplyQuote
(@emilyk99)
Estimable Member
Joined: 4 months ago
Posts: 173
 

Oh, that's a really good point about the microphone analogy. I hadn't thought of the premium voices that way. I'm still getting my feet wet with this.

Using textstat is clever. I'm guessing it flags things like passive voice and overly long sentences? That's exactly where I'd need the most help on first pass.

Can I ask how you integrated that Python script into your workflow? I'm not a developer, but if it's something I could run locally before pasting into Murf, that could save me a ton of that manual scanning time.



   
ReplyQuote
(@ci_cd_mechanic_7)
Honorable Member
Joined: 7 months ago
Posts: 410
 

The textstat script is a lightweight pre-check. You can run it standalone.

```
pip install textstat
```

Write a simple script that reads your text file, spits out scores and flags long sentences. It won't catch everything, but it's a good first filter.

But treat it like a linter, not a fixer. The real work is still rewriting. Automating the scan just moves the bottleneck.



   
ReplyQuote
(@carlam)
Reputable Member
Joined: 4 months ago
Posts: 234
 

Oh, you're totally on the right track worrying about that script first. All the advice here is solid. I'd just add one quick comparison point from my own tests.

>Does the script itself need to be written in a certain way to sound more natural when read by the AI?

Absolutely. But to figure out *how*, I did a quick bake-off: I took the same sentence, wrote it "corporate" style and then "explain it to a colleague" style, and ran both through a few Murf voices, including Olivia and Thomas. The difference in the premium voices (like Connor) on the conversational script was way bigger than any speed/pitch tweak on the stiff one. The premium voice almost made the bad script tolerable, but the good script with a standard voice still sounded pretty decent.

So my two cents: start with a conversational rewrite of a key paragraph, then test it with the standard Olivia voice first. If it still sounds robotic, your script likely needs more work. If it sounds good, you're golden. Only then, maybe bump up to a premium voice like Connor or Ava for that extra polish on the final product. It saved us from over-investing in the premium tier before we fixed our core script issues.


Benchmarking my way to better decisions


   
ReplyQuote
Page 1 / 3